M4315-Pro Bluebolt Power Conditioner
M4315-Pro Bluebolt Power Conditioner
From easy reboots of locked-up electronics to comprehensive energy tracking and scheduled conservation, BlueBOLT provides a unique combination of control and monitoring directly at the electronics power source. The 15A 9-Outlet M4315-PRO Power Management with Control and Energy Monitoring from Panamax has one front panel outlet and eight independent outlets that are controllable/programmable via the web with the RS-232 card (included but not installed) or the included CV-1 BlueBOLT card in back. Linear filtration is provided with three isolated LiFT filter banks plus one isolated filter bank for high current devices. Automatic Voltage Monitoring (AVM), Protect or Disconnect circuitry and sequential startup/shutdown provide superior protection to whatever is connected to the device. Two buttons on the front panel are for programmable rebooting. Provides LAN, telco, cable/satellite/antenna TV signal side protection. The M4315-PRO voltage sense trigger input uses a standard 3.5mm mini-mono plug. This feature provides an on/off trigger for the M4315-PRO using a direct current (DC) voltage signal. Many components such as pre-amplifiers and receivers have a DC trigger built in, and will transmit a constant power signal when turned on and in use. The presence of this power signal will turn on the M4315-PRO s switched outlets. When the source component is turned off, the voltage trigger signal is also turned off, and the M4315-PRO s shutdown sequence is initiated. An AC adapter of the appropriate voltage (5-24 V DC) plugged into a switched outlet may also be used if a DC trigger is not built in. The sleek design includes volt/amp metre, outlet status and warning LEDs. Includes removable rack ears.